Bedfordview sits on Witwatersrand rocks along the Linksfield ridge, with large stands and substantial landscaping.
Ridge position means deeper drilling, and access on sloping stands is a real constraint.
What Is Under Bedfordview
The formations below are what a rig actually meets on a Bedfordview property, and between them they govern the depth, the casing requirement and what the hole will realistically give you.
| Formation | Where it sits | What it means for drilling |
|---|---|---|
| Witwatersrand Supergroup quartzite | The ridges running through and around the suburb | Hard, well-fractured in places, and a reasonable aquifer where the hole intersects a fracture zone. Hammer drilling throughout. |
| Witwatersrand shale | Interbedded with the quartzite in the valleys | A poor aquifer. Low yields off the shale itself, with the useful water in structures cutting through it. |
| Diabase dykes and fault zones | Cutting the sequence | The principal targets. They both carry water and compartmentalise it, which is why results vary so much across short distances. |
Send your street and what the water is for, and get an itemised quote for Bedfordview.
Get a Bedfordview Borehole QuoteWhat That Means for Your Borehole
- Ridge and valley positions behave differently, and the difference shows up in both depth and yield.
- Mining history sits under parts of this ground, which makes water quality testing more important here than the yield question.
- Yields are moderate. Storage paired with a tested sustainable rate is the standard working design.
Where We Work Around Bedfordview
- Bedfordview and Bedford Gardens
- Linksfield ridge boundary
- Edenvale approaches
- Germiston side
- Larger estate stands
- Commercial properties off Van Buuren Road
What to Watch For Here
Sloping stands on the ridge constrain rig positioning, and level working space is often scarcer than access to the property.
Quartzite drills slowly, which shows up in the per-metre rate on this ground.
What the Water Is Used For
- Irrigation for large gardens and estate grounds
- Entrance landscaping and common-area planting
- Keeping the pool level up, subject to the water analysis
- Standby supply for larger properties
- Washing down driveways, paving and vehicles
Wellpoint or Borehole?
Not viable. There is no shallow sand aquifer here and hard rock near surface leaves a driven point nothing to draw from.
Water Quality in Bedfordview
Water quality deserves real attention on the Witwatersrand. Historical gold mining across the basin means elevated sulphate, iron and metals appear in some groundwater, and acid mine drainage has affected parts of the West and Central Rand specifically. A full laboratory analysis before any use beyond irrigation is the sensible baseline rather than a precaution.
A water analysis is what turns that from a general expectation into a number for your specific hole, and treatment should be specified against the result rather than against the area's reputation.
Registration and Abstraction
Johannesburg Water's by-laws require boreholes to be registered with the City, and prohibit any physical connection between a borehole system and the municipal reticulation. The National Water Act sits above that: reasonable domestic use generally falls under Schedule 1, while irrigation or commercial abstraction may require registration or a water use authorisation from the Department of Water and Sanitation. Requirements change, so confirm your position before drilling.
Related Services
For the drilling process itself, the geology across the rest of the country and how a quote is put together, see Borehole Installers South Africa.
Borehole Prices in Bedfordview
Drilling is charged per metre, so depth drives the total. The ranges below are framed for local ground conditions and access.
| Item | Indicative range | What moves it locally |
|---|---|---|
| Drilling, per metre | R450 - R1,050 /m | Quartzite is hard and slow. Depth to a productive structure varies considerably across the suburb. |
| uPVC casing, installed, per metre | R400 - R700 /m | The weathered zone needs casing, and its thickness depends on position relative to the ridge. |
| Mobilisation and site establishment | R2,500 - R9,000 | Access and site conditions move this; a site visit settles it before quoting. |
| Water survey | R5,000 - R12,000 | Targets structure rather than depth. Worth most where yield is fracture-dependent. |
| Yield testing | R3,500 - R15,000 | Establishes the sustainable rate that pump selection depends on. |
| Pump, supplied and installed | R15,000 - R45,000 | Greater depth means more head, which means a larger pump and heavier cable. |
| Storage and booster | R12,000 - R35,000 | Needed wherever peak demand exceeds the borehole's sustainable rate. |
| Typical complete project | R75,000 - R200,000+ | Everything above, excluding treatment, which depends entirely on the water analysis. |
These are indicative ranges, not a quotation. They are compiled from published South African supplier and contractor pricing to give you a starting point for budgeting. They are not our rate card, and no figure here is a commitment.
Treat them as a broad guide only. Published borehole pricing in South Africa varies enormously - different 2026 guides quote per-metre drilling rates for the same province that differ by a factor of three - because depth, geology, access, specification, distance and fuel costs all move the number. Depth in particular is not known until the hole is finished. Figures generally exclude VAT unless noted, and change over time. Only an itemised written quote against your actual site means anything.
Bedfordview Borehole FAQs
Why are Bedfordview boreholes deeper?
Ridge position. Both the water table and the productive structures sit further below surface on the higher ground than in the valleys nearby.
That shows up as metres rather than as a higher rate, which is why per-metre pricing is the structure that keeps it honest.
Can a large Bedfordview garden run on one borehole?
Usually, with adequate storage. A moderate sustainable yield filling a large tank continuously delivers an irrigation peak the hole itself could not sustain.
Sizing that off a real yield test rather than an assumption is what prevents a system that runs dry at the worst point in summer.
Is Bedfordview groundwater affected by mining?
It can be, and on the Witwatersrand it is worth establishing rather than assuming either way. A century of gold mining across the basin has left elevated sulphate, iron and metals in some groundwater, with acid mine drainage a known issue in specific parts of the Rand.
That is a testing question, not a reason to abandon the idea. A laboratory analysis of your own hole tells you what you actually have and what, if anything, needs treating.
What yield should I expect in Bedfordview?
Moderate. Witwatersrand quartzite yields where a hole intersects fracturing, and the shale between the quartzite units yields very little at all.
A tested sustainable rate of a few cubic metres an hour is a good outcome here and, with storage, comfortably covers domestic and garden demand.
NEED A BOREHOLE IN BEDFORDVIEW?
Send your street and what you need the water for, and get an itemised quote.
Get My Free QuoteGet a Borehole Quote in Bedfordview
Tell us where you are and what the water is for.
Client Reviews
Powered by leaderr
