Sherwood sits on the inland side of the Berea on Natal Group sandstone, with established suburban stands and mature gardens.
Fracture-dependent yields, moderate depths, with siting doing the real work.
What Is Under Sherwood
The formations below are what a rig actually meets on a Sherwood property, and between them they govern the depth, the casing requirement and what the hole will realistically give you.
| Formation | Where it sits | What it means for drilling |
|---|---|---|
| Natal Group sandstone | The bedrock underlying the Berea ridge and the older suburbs on it | Fractured sandstone that yields moderately where a hole intersects fracturing. Water quality is generally good where it produces. |
| Berea Formation sands | Capping the ridge in places, of variable thickness | A shallower aquifer above the bedrock, easier to reach and more exposed to surface conditions. |
| Dwyka tillite and basement granite | Beneath the Natal Group sequence | Poor aquifers. Drilling deeper into them generally means less water, not more. |
Send your street and what the water is for, and get an itemised quote for Sherwood.
Get a Sherwood Borehole QuoteWhat That Means for Your Borehole
- Deeper is not better here. Below the Natal Group the formations are poor aquifers, so the productive interval is finite and drilling past it wastes money.
- Yields are moderate and fracture-dependent, which makes siting worth doing properly.
- Mature gardens and tight urban access constrain rig positions more often than geology does on the ridge.
Where We Work Around Sherwood
- Sherwood central and Mayville
- Overport and Sydenham approaches
- Westridge and Manor Gardens
- Berea boundaries
- Clare Estate side
- Older stands with established planting
What to Watch For Here
Older suburbs carry unrecorded services, and a services check before siting is time well spent.
Yields vary over short distances on this ground, which is why a survey beats a guess even on a modest stand.
What the Water Is Used For
- Irrigating established gardens and mature trees
- Topping up the pool, subject to what the analysis says
- Washing paving, vehicles and hard surfaces
- Standby supply when municipal water is interrupted
- Reducing a monthly municipal water bill
Wellpoint or Borehole?
Sometimes, where a genuine sand cap sits over the bedrock with a shallow water table. On thinner cover over sandstone it is not viable. A site assessment settles which of those a property is.
Water Quality in Sherwood
Natal Group sandstone water is generally good quality and moderately soft. Iron shows up regularly, and on older properties with historical septic systems nitrate is worth testing for specifically. The high summer rainfall gives strong recharge, which also means surface influence on shallow water is real.
A water analysis is what turns that from a general expectation into a number for your specific hole, and treatment should be specified against the result rather than against the area's reputation.
Registration and Abstraction
eThekwini requires boreholes to be registered with eThekwini Water and Sanitation, and prohibits any cross-connection between borehole water and the municipal supply. The National Water Act governs how much you may abstract: reasonable domestic use generally falls under Schedule 1, while irrigation or commercial volumes may require registration or a water use authorisation from the Department of Water and Sanitation. Requirements change, so confirm your position before drilling.
Related Services
For the drilling process itself, the geology across the rest of the country and how a quote is put together, see Borehole Installers South Africa.
Borehole Prices in Sherwood
Drilling is charged per metre, so depth drives the total. The ranges below are framed for local ground conditions and access.
| Item | Indicative range | What moves it locally |
|---|---|---|
| Drilling, per metre | R450 - R1,000 /m | Sandstone is moderately hard drilling, and the productive interval is limited so depth is bounded. |
| uPVC casing, installed, per metre | R400 - R750 /m | The weathered zone and any sand cover need casing to keep the hole stable. |
| Mobilisation and site establishment | R2,500 - R9,000 | Access and site conditions move this; a site visit settles it before quoting. |
| Water survey | R5,000 - R12,000 | Targets structure rather than depth. Worth most where yield is fracture-dependent. |
| Yield testing | R3,500 - R15,000 | Establishes the sustainable rate that pump selection depends on. |
| Pump, supplied and installed | R15,000 - R45,000 | Greater depth means more head, which means a larger pump and heavier cable. |
| Storage and booster | R12,000 - R35,000 | Needed wherever peak demand exceeds the borehole's sustainable rate. |
| Typical complete project | R70,000 - R185,000+ | Everything above, excluding treatment, which depends entirely on the water analysis. |
These are indicative ranges, not a quotation. They are compiled from published South African supplier and contractor pricing to give you a starting point for budgeting. They are not our rate card, and no figure here is a commitment.
Treat them as a broad guide only. Published borehole pricing in South Africa varies enormously - different 2026 guides quote per-metre drilling rates for the same province that differ by a factor of three - because depth, geology, access, specification, distance and fuel costs all move the number. Depth in particular is not known until the hole is finished. Figures generally exclude VAT unless noted, and change over time. Only an itemised written quote against your actual site means anything.
Sherwood Borehole FAQs
What does a Sherwood borehole cost?
More than a coastal sand hole, because the ground is harder and the holes are deeper. Less than the deep-fracture settings inland.
The per-metre rate and what the quote includes for casing and testing are what to compare, not the headline total.
Do I need a survey on a small stand?
It still helps. Even where positions are limited, a survey identifies which of the available spots has the better chance of intersecting a fracture.
On very constrained stands it also confirms whether drilling is practical at all before money is spent.
How deep do boreholes go in Sherwood?
Less deep than people expect, because the productive interval is in the Natal Group sandstone and the formations beneath it yield poorly. Drilling past the sandstone rarely improves matters.
That is a useful thing to know when reading a quote, because it means there is a sensible ceiling on depth here rather than an open-ended one.
Can a rig get into an older Sherwood property?
Often, but mature gardens, narrow driveways and retaining walls on the ridge make it a real question rather than a formality. The working space at the drilling point matters as much as the route in.
A site visit establishes it before quoting, and occasionally it rules out the best-sited position in favour of a workable one.
NEED A BOREHOLE IN SHERWOOD?
Send your street and what you need the water for, and get an itemised quote.
Get My Free QuoteGet a Borehole Quote in Sherwood
Tell us where you are and what the water is for.
Client Reviews
Powered by leaderr
